Air Compressors & Nailers
AIR COMPRESSOR ELEC. SMALL "PANCAKE" STYLE
Elec. Pancake Compressor
Porter Cable Air Compressors, Hand Carried Electric Oil-free pump for no maintenance;
6 gallon pancake style tank for stability
135 PSI - higher pressure for longer air tool performance
2.6 SCFM @90 PSI for fast recovery
Min Rates starting at $26.00
AIR COMPRESSOR ELEC. TWIN TANK
2 HP, 3400 RPM, S1-Rated for Continuous Duty, Overload Protection with Manual Reset, 115 Volt, 60 Hz, Heavy-Duty, Industrial Grade with Ball Bearings for Greater Durability
Pressure Switch with On/Off Lever, Regulator w/Air Line Pressure Gauge, 12 oz. Crankcase Pre-filled with Oil, 95/125 PSI Operating Pressure, Factory Tested, Safety Relief Valve
Min Rates starting at $31.00
Air Compressor 5hp Gas Twin Tank
5 hp Honda gas powered
14.2 CFM
Wheel barrow design
Min Rates starting at $38.00
AIR NAILERS
Brad Nailers perfect for brad nails from 5/8" to 1 1/4"
Rates starting at $19.00
Finish Nailers for finish nails from 3/4" to 2 1/2"
Rates starting at $19.00
Roofing Nailers shoot nails from 7/8" to 1 3/4"
Rates starting at $19.00
Framing Nailers shoot framing nails from 2" to 3 1/2"
Min Rates starting at $19.00
Underlayment Stapler
The 1890U PowerStapler® is a trigger-pull stapler designed to bring Powernail quality and flooring expertise to a pneumatic stapler. The 1890U is designed for use with 1/4” crown, 18 GA staples from 7/8” to 1-1/2” in length.
Min Rates starting at $18.00
Palm Nailer
The industries best solution to blind nailing close to the wall. Save both, time and money!
Pressure activated…simply press down, and let the tool do the work. The Power Palm will allow blind nailing closer to the wall and reduce the amount of face nailing.
Min Rates starting at $19.00
Hardwood Floor Nailer
The industry’s first pneumatic, trigger-operated, 20 GA. cleat nailer is designed to work with today’s popular 5/16 in. to 9/16 in. tongue and groove flooring. The Model 2000 offers more consistent control of depth and provides the perfect insertion angle, and the new 20 GA. Powercleats insure less split-out on even the thinnest floors.
Min Rates starting at $29.00
Hardwood Floor Nailer
Nothing attacks a hardwood flooring job like The Porta-Nailer. The first species of its kind offering Porta-Nails' original Ratchet Assembly, The Porta-Nailer Hammerhead ensures that the ram does not return until the nail is properly seated. One or two strikes of the head is all it takes for preferred seating everytime. Feed your hunger for fast, easy, economical, accurate performance and the tightest floor on earth.
Min Rates starting at $19.00
Hardwood Floor Nailer
-
Preferred Seating System
-
Pneumatic Flooring Nailer
-
Designed for use with either T Porta-Nails in sizes 2", 1 1/2" and 1 3/16" and L Porta-Nails in sizes 2" and 1 1/2"
-
Designed for nailing 1/2" and 3/4" thick tongue and groove flooring
-
Holds up to 150 T or L Porta-Nails
-
Min Rates starting at $32.00
Hardwood Floor Stapler
If you need a flooring stapler , BOSTITCH® has you covered. BOSTITCH® staplers are specifically designed for hardwood or engineered floors, and to help you get the job done faster and more efficiently; from directional exhaust to extra-wide base plates for added stability.
Min Rates starting at $32.00
NOTE: Prices displayed do not include sales tax or damage waiver.